Leaderboard

M2 Download Center Download Here ( Internal ) [Hidden Content] Client side is from 2018 official root. It checks the status of the channel from db and gets the port and addr. It also checks if that map exists in that channel(config). *Info: This is currently disabled on official servers.

M2 Download Center Download Here ( Internal ) Good evening Metin2Dev, Everyone should know these armors from way back, as they were included in the 2004 client of Metin2. But these armors had many bugs, were just core junk. Have now reworked and merged the textures, added new bones, fixed meshes and re-rigged. The armors should now work smoothly and no more bugs on white so that they can be used after 17 years, have fun with it. Edit* With the Kriger is still the original helmet, but now have no screen Download: [Hidden Content]

M2 Download Center Download Here ( Internal ) [Hidden Content] Reversed from 22.2.7.0 Official Binary. Client part is from 2018 Official Root. You can set different colors:

M2 Download Center Download Here ( Internal ) June 17 2014 - I rewrote the whole the source. FAQ: How can I open the project, which version of Visual Studio do I need? I used Visual Studio 2013, but I'm sure you can open in 2012 too. What is CRC? You can learn more about Cyclic redundancy check here. How can I make a list for the patcher? You can use the lister tool, it's in the source. HOW TO MAKE IT WORKS: 1. Change the ServerURL variable in Globals.cs to your url 2. Build the project 3. Create a list with the lister tool (Example of the list) 4. Upload the files and the patchlist to your server (Example of the folder structure) Downloads: MEGA.CO.NZ If you have any question or suggestion please just reply to this topic. Kind Regards, Sanchez

the code does not cause this, I had the same problem before at visual studio. It is not patcher's fault. [Hidden Content]

M2 Download Center Download Here ( Internal ) For those who got bored of buying the wrong boss box from a shop because they all look the same, I leave here a pack of 18 different boss boxes. I designed them originally for World of Metin2 but I think it's time to share this with the community. [Hidden Content] [Hidden Content] Hope you enjoy it! And don't forget to give credit where credit is due.

System it's working very well: [Hidden Content]

Introduction I think everyone know about this famous bug. I profiled the game and checked granny documentation why it happens because we also faced this on MAP1s since we have a lot of offline shops. Actually the game not even freezes, it runs well and the updates happen. What eventually happens there is just that update time takes too long so it will skip rendering. What makes update times longer? The answer is granny controls. When you minimize your game, the completed controls never get freed. It's because the game frees them in CGrannyModelInstance::UpdateWorldPose which is called from CPythonApplication::RenderGame in a long way. There are just more and more of them that are never freed and that makes GrannySetModelClock take more and more time so when you open up your client from the minimized state it will never finish the update fast enough to call RenderGame in which they would be freed again. [Hidden Content] Thats all, you won't face the "black screen bug" again! Good luck guys!

After all, it's getting detected. I haven't used this patcher in almost 2 years. I made a fresh compilation just in case. [Hidden Content] I'm currently using the patcher I made in Electron, it isn't being detected. [Hidden Content]

Summary Thread Last Update → Monday 1 April 2024 Powered by Core X Programming & Scripts 395 Topics Features & Metin2 Systems 421 Topics Bug Fixes 263 Topics Quest Functions & Features 38 Topics Commands 30 Topics Metadata 9 Topics Hack Protection & Security 28 Topics Interfaces 15 Topics

Download Updated at 2023.08.05. Alternative download links: Client & Serverfiles + VDI + Extension Pack [40250] Reference Serverfile + Client + Src [15 Available Languages] My goal was to make a reference r40250 serverfile as official as possible compared to what GF had back when their files got leaked in early 2014. No new systems added, only bug fixes. While I spent several hours testing, there may still be bugs. Please report bugs to me so I can fix them in the future, I want to make this project as bug free as possible. Available languages: EN/DE/HU/FR/CZ/DK/ES/GR/IT/NL/PL/PT/RO/RU/TR Please read Languages.txt to learn how to change the default EN language. SSH for VM: root/123456789 MySQL: root/123456789 Ingame: admin/123456789 Aliases and it's commands: start cd /usr/metin2/server && sh start.sh close cd /usr/metin2/server && sh close.sh clean cd /usr/metin2/server && sh clean.sh backup cd /usr/metin2/server && sh backup.sh questcompile cd /usr/metin2/server/share/locale/english/quest && python2.7 make.py dbclean cd /usr/metin2/src/server/db/src && gmake clean dbdep cd /usr/metin2/src/server/db/src && gmake dep dbcompile cd /usr/metin2/src/server/db/src && gmake -j9 gameclean cd /usr/metin2/src/server/game/src && gmake clean gamedep cd /usr/metin2/src/server/game/src && gmake dep gamecompile cd /usr/metin2/src/server/game/src && gmake -j9 Please read Changelog.txt to find more about the changes I made. Special thanks to: @Mali for the clean and updated client & server src files. @Sanchez for the 2014 base client. @Veltor88 for the translate.lua pack. @Fazer for the locale_string pack I made a little video about installing the serverfile (vm) and changing the language: PS: I know it's pretty late in 2021 but better than ever Sincerely, TMP4

M2 Download Center Download Here ( Github Backup ) - Download Here ( GitHub ) Download Here ( VM 9.2 ) or Download Here ( VM 12 ) Use this source: [Hidden Content] or [Hidden Content]

M2 Download Center Download Here ( Internal ) Download Here ( GitHub )

M2 Download Center Download Here ( Internal ) Hi, here I publish my edit of the public Render Target System. I hate it, when people earn money with public systems. Preview: [Hidden Content] DL: [Hidden Content] Original Thread [Hidden Content]

How to create a Metin2 private server with Metin2 Project - Français Introduction I want to offer Metin2 Project as an alternative to stable and functional server files. Metin2 Project is shaped according to my ideas and my desires, my only limit is my imagination. All changes and fixes to Metin2 Project are made with defines. You can suggest ideas to me but I am free to refuse them without any justification. Summary Important information to know about Metin2 Project. Initial working base => @ Mali & @ TMP4 => TMP4's Project DB & GAME Ready for FreeBSD 32 Bit & 64 Bit Ready for MySQL Server 8 Ready for Microsoft Visual Studio 2022 EN DE HU FR CZ DK ES GR IT NL PL PT RO RU TR Avalable languages Test Environment When developing the project, the following configuration was used. FreeBSD 13.1 64 Bit MySQL Server 8.0.29 LLVM-Devel 15.0.D20220328_1 GDB 11.2 Makedepend 1.0.6,1 GMake 4.3_2 Python 2.7.18_1 Microsoft Visual Studio 2022 Access Credentials No database login credentials are provided. You must set up your own user to administer and manage your Metin2 Project server. The associated tutorial, allows you to create your login credentials to the database, you should be able to get there... Finally, I hope for you. Metin2 Accounts User: playerone User: playertwo User: playerthree User: playerfour User: playefive User: playersix User: playerseven User: playereight User: playernine User: playerten Password: player Changelogs 2022.XX.XX.0001 Spoiler XXX (In Dev, Use TMP4 Projet) Downloads Download the project and enjoy! No virtual machine is provided, you can create it yourself using the associated tutorial. 2022.XX.XX.0001 => Server + Client (In Dev, Use TMP4 Projet) Made With and Metin2 Project

M2 Download Center Download Here ( Internal ) MEGA: Here

The black screen was mostly caused by two major bugs: The granny controller freezing the process for n seconds until you get dc'd from the game You can test it by: Spawning tons of monsters Minimize the client for 30 - 40 minutes Maximizing the window again (it will freeze exactly at this point) The EffectManager not destroying the expired effects while the window was minimized, which caused all the executed effects to stack up and be run all at once after maximizing the window again You can test this bug very easily: Spawn tons Flame Ghosts and minimize the window /ma "Flame Ghost" 100 /cannot_dead I wasn't sure how to solve the 1st one, but for the 2nd one you can fix it in one of these ways: 1st Way) refresh only once every 256 frames = 4-6 seconds depending on the lag 2nd Way) effect manager refresh for every frame 3rd Way) move the update from RenderGame to UpdateGame (it may not be called if skipFrame=true on ::Process)

BR Patch 07.09.2021 (Metin2 Download) GF v21.3.7.0 Patch (Metin2 Download)

M2 Download Center Download Here ( Internal ) Download Here ( Latest Version ) This WE is a version compiled directly by me which includes infinite fixes and features. It's certain that you won't longer use the worldeditor_en! To make it simple, I wrote all the details about this feature and the common WE inside the relative config file: (called WorldEditorRemix.ini) ; Info: ; -) 100% translated ; -) granny2.11 ; -) F6 as Insert alternative ; -) many default features not present inside the worldeditor_en (probably, that binary was taken out from an SVN long time ago and resource hacked) such as Ins for all regions and skyboxes ; -) WASD UPLEFTDOWNRIGHT to move around (+asynchronous diagonally movements) ; -) UP-LEFT-DOWN-RIGHT to move around*10 (+asynchronous diagonally movements) ; -) config file for few things ; Output options by default ; few others such as default WASD movement ; whether or not Insert should let you go where you were before the press ; no MAI dump when saving atlas ; whether or not DevIL should compress and remove alpha from minimap.dds ; whether or not loading .mdatr building heights ; default textureset when creating maps ; overlapped tabs ; other stuff ; -) several bugfixes ; default title app name ; attempting to write to an empty textureset name when creating new maps ; ViewRadius doubled every load&save ; shadowmap.dds creation ; assert when saving atlas ; crash when adjusting height ; many buffer under/overflows ; *.mdc collision data saving (for game_test) ; not checking output options when loading maps ; water brush waterid bug (the id was increased until 256 each time the function was called; now it's based on the water height just like it should be) ; init texture map reload map crash and last 2px always blank ; square shape even for up/down height brushes ; add textureset texture button (+multiselection) ; remove textureset texture feature (just selecting a texture from the list and pressing DELETE) ; creation of empty textureset with index -1 (changed to 0) ; change baseposition button ; misspelled stuff ; skybox bottom image (nb: you also need a fixed launcher for this) ; removed boring CTRL requirement (to move the camera) when editing daylight/attr ; fixed refresh texture imagebox onKey pressing the down/up keys (like when onClicking them) ; fixed TextureSet file creation if not existing ; fixed new wolfman motion event handling ; fixed crash when editing animation attack bones and 00010.gr2 was missing ; fixed locale/ymir/mob_proto load (it autodetects the most common structures) and <map>/regen.txt load/save ; fixed ./group.txt load ; fixed load/save/edit <map>/regen.txt (very nice for "m" regens, untested for "g") ; load from PACK is available if pack/property is present! Be sure pack/Index exists! ; fixed multi-object selection crash ; fixed crash when previewing a missing texture ; fixed not clearing of old environment (e.g. skybox) when switching maps ; fixed not creating property folders in root tree (object tab) ; fixed object attachment in Model Tab ; fixed newly particles names in Effect Tab ; fixed crash when saving a .mse script with no mesh model ; fixed crash when inserting a lower gradient ; -) created new TextureSet field when creating new maps ; -) created new Change/Delete Texture buttons when double-clicking a texture ; -) created Background Music playback and Shadow Recalculate buttons ; -) created water height "set 0z", "+1z", "-1z" buttons ; -) server_attr generator ; -) every crash will generate a logs/WorldEditorRemix_{target}_{date}.dmp file useful for debugging ; -) implemented a "water path" mapsettings option (the launcher requires additional code) ; -) implemented a "wind strength" msenv option (the launcher requires additional code) ; -) the "encrypt data" feature does nothing (unimplemented) ; Note: ; 0) there are no regressions in this version! a bug here means it'd also be present in older WE versions too! ; 1) the shadow output option is tricky: when UpdateUI is called, shadows are hidden although the check is pressed (i implemented the shadow recalculate function for that) #fixed since v11 ; 2) the bgm player requires /miles and the fadein/out doesn't work until you load the map ; 3) the adjusting height button works only if mdatr height is detected ; 4) the Debug version is laggy when working on maps such as n_flame_dungeon and n_ice_dungeon (by default, because SphereRadius are intensively checked in SphereLib\spherepack.h) ; 5) if you load a map, the script panels (where you load .msa et similia) will have the camera perspective a little fucked up (0z instead of -32767z or 0x 0y -163,94z) ; 6) few tree objects are not movable and/or highlightable after placed on the ground and their selection is invisible (you can still delete 'em) ; trick: draw a square selecting a normal building and 'em, then move the building and you'll see all of 'em will be moved! ; 7) the server_attr generator will clean all the unused flags! attr[idx]&=~0xFFFFFFF8; ; 8) you can read files from pack/Index 'n stuff but be aware that Property will not be considered! #fixed since v15 ; 9) the MonsterAreaInfo features are laggy and buggy as fuck ; 10) even though you can select many textures at once (using ctrl+click on textureset list; for brushing or initializing a base texture), you can't delete more than one at the same time ; 11) the .mdatr height is tricky; if you move a building, the height will not be refreshed until you put a new building or whatever you want to trigger the update event ; 12) by default, the worldeditor tries to render only the first 8 terrain textures of a 32x32px region (nb: a 1x1 map is a 256x256 px region) ; 13) the minimap rendering cannot catch the buildings/trees inside the first 2x2 regions due a ymir cache fault and you need to set the camera to "see" them ; 14) when the textureset, environment, etc load fails, the old filename still remains loaded ; 15) the attr flag "3" (three) has no implementation, so don't use it! ; 16) load from PACK doesn't load texturesets from files for first (if they are already in pack/), and the object placer's object list will remain empty because it takes the list from property/ (and not from pack/property) ; 17) to save the regen.txt you press CTRL+S ; 18) if you enable the wireframe (f4) when on Attr Tab, you see the terrain all white ; 19) the water brush disappears when the camera renders the waterwheel small/big effect ; 20) the monster area info goes under ground if you're outside the relative sectree ; 21) the full skybox may be displayed only after the top picture has been added (if the other textures have already been inserted) ; 22) the slider in the Attr Tab is something like "16 photoshop layers" in which you can split your attrs; not so helpful and quite confusing sometimes ; 23) the fixed model - object attachment attaches static objects (hairs'skeleton will not mirror the playing animation) ; 24) in environment tab, if you insert lower gradients, you may end up with an out of range crash #fixed since v30 ; 25) brushes working out-of-screen/map-range may affect random terrain places ; TODO: ; A) look at more than 8 textures for region -> DONE ; B) create a shortcut to fix the #5 note -> DONE ; C) disable the radius <= GetRadius()+0.0001f check to fix the #4 note -> REJECTED ; the worldeditor_en calls this assert and, if ignored, the lag ceases to exist (this will not occur in source version) ; at least, if the release version is not a problem for you, use that in those few cases when .mse are abused and try to kill the debug one ; D) translation in more languages other than english -> REJECTED ; english should be enough! ; E) alternative path for d: -> REJECTED ; you can mount d as a subpath of c like this: ; subst d: "c:\mt2stuff" ; F) need to fix note #19 #25 -> TODO [shortcuts] ; ### SHORTCUTS ; # ESC(ape) Clean cursor ; # Canc(el|Delete) Delete stuff such as selected buildings ; # Ctrl+S Save map ; # Ins(ert) or F6 Save shadowmap|minimap.dds ; # F3 BoundGrid Show/Hide ; # F4 Render UI Show/Hide ; # F11 WireFrame Show/Hide ; # R Reload Texture ; # Z and X Decrease/Increase Texture Splat by 0.1 ; # CapsLock Show GaussianCubic effect if shadows are displayed ; # L-Shift+1-6 Show TextureCountThreshold flags (&2-7) as colors on the ground ; # L-Shift+8 Set Max Showable texture to 8 (de-fix note 12) ; # L-Shift+0 Set Max Showable texture to 255 (fix note 12) ; # H Refresh MDATR Heights (useful when you move an object) (fix note 11) ; # Y Set Perspective as default (fix note 5) ; # T Set the Camera to catch all the object on the screen (w/a note 13) then you'll be ready to press Insert/F6 ; # DO NOT HAVE AN OBJECT SELECTED WHEN USING THOSE SHORTCUTS (MW1-7) ; # MouseWheel+1 move cursor x rotation ; # MouseWheel+2 move cursor y rotation ; # MouseWheel+3 move cursor z rotation ; # MouseWheel+4 move cursor height base (1x) ; # MouseWheel+5 move cursor height base (0.5x) ; # MouseWheel+6 move cursor height base (0.05x) ; # MouseWheel+7 move cursor ambience scale (1x) ; # MouseWheel+Q move selected object height base (1x) ; # MouseWheel+9 move selected object x position (1x) (+asyncronous) ; # MouseWheel+0 move selected object y position (1x) (+asyncronous) ; # MW+RSHIFT+9|0 as above but *10x (+asyncronous) ; # MW+RCONTROL+9|0 as above but *100x (+asyncronous) ; # MouseLeft Insert Objects ; # MouseRight Move camera (it could require CTRL too) ; # SPACE Start move/selected animation in Object/Effect/Fly CB ; # ESC Stop animation in Effect/Fly CB [config] ; ### CONFIG OPTIONS VIEW_CHAR_OUTPUT_BY_DEFAULT = 1 VIEW_SHADOW_OUTPUT_BY_DEFAULT = 1 VIEW_WATER_OUTPUT_BY_DEFAULT = 1 ; WINDOW_HEIGHT_SIZE = 1080 ; WINDOW_WIDTH_SIZE = 1920 WINDOW_FOV_SIZE = 45 ; #100 = 1px (minimal px movement when pressing WASD) WASD_MINIMAL_MOVE = 100 ; came back from where you were before pressing Insert/F6 NO_GOTO_AFTER_INSERT = 1 ; disable MAI dumps when saving atlas and/or pressing Insert/F6 NOMAI_ATLAS_DUMP = 1 ; disable minimap.dds alpha saving and enable compression NOMINIMAP_RAWALPHA = 1 ; enable .mdatr height collision loading when moving on buildings or adjusting terrain DETECT_MDATR_HEIGHT = 1 ; disable fog when loading maps NOFOG_ONMAPLOAD = 1 ; refresh all checkbox configurations when loading maps 'n stuff REFRESHALL_ONUPDATEUI = 0 ; set a default mapname prefix when creating new maps ("" to disable) NEW_MAP_MAPNAME_PREFIX = "metin2_map_" ; display a default textureset when creating new maps ("" to disable) ; note: it loads the filepath if exists, otherwise it will create an empty textureset file NEWMAP_TEXTURESETLOADPATH = "textureset\metin2_a1.txt" ; create a default textureset as "textureset/{mapname}.txt" ; note: this option is not considered if NEWMAP_TEXTURESETLOADPATH is not empty. [before v24] ; note: this option is not considered if the TextureSet path input is not empty when creating a new map [since v24] NEWMAP_TEXTURESETSAVEASMAPNAME = 1 ; remove the weird attr flags from the generated server_attr SERVERATTR_REMOVE_WEIRD_FLAGS = 1 ; show diffuse lighting to object VIEW_OBJECT_LIGHTING = 1 ; path of mob_proto used for regen MOB_PROTO_PATH = "locale/ymir/mob_proto" ; select monster area info checkbox at startup VIEW_MONSTER_AREA_INFO = 0 ; brush cursor / object selection color RGB float between 0.0 to 1.0 (default: green -> 0 1 0) RENDER_CURSOR_COLOR_R = 0.0 RENDER_CURSOR_COLOR_G = 1.0 RENDER_CURSOR_COLOR_B = 0.0 Download: [Hidden Content] How To Map: This release will not cover this part. Look at CryPrime`s tutorials to understand how to do it. About the ServerAttr Generator: (since v14) This is a beta function but it should work fine. I tested it on gm_guild_build (1x1), metin2_map_a1 (4x5), metin2_map_trent (2x2), metin2_n_snowm_01 (6x6) and the result was the same as the blackyuko map editor. (I use a different lzo version and I clean deprecated and useless flags, so the size is different from this last one but the "final image" will be the same; using game_test to fix his server_attr will let mine and his perfectly equal byte per byte) I also give you the source code of my server_attr generator function. CLICK A server_attr file is based on all the attr.atr files merged into a one raw RGBA image and each one scaled from 256x256 to 512x512. After that, the image will be splitted into sectors of 128x128 px and each one compressed using lzo compression. The server_attr header is composed by the size of the map*4. (e.g. a 4x4 will have a 16x16 size with 256 sectors inside) (gj ymir CLICK) An uncompressed server_attr sector is just like this: CLICK (the sub 4 byte header is the size returned by the LzoCompress which indicates how much the compressed sector data are large) Each attr.atr is just like this: CLICK (the header is composed of 6 byte in total: 3 WORDs respectively for version, width and height; they are always 2634, 1, 1 so don't bother about it) A single attr.atr scaled from 256x256 to 512x512 will be just like this: CLICK You can use the game_test (from source) to perform few tasks like: Create a server_attr from a .mcd file (I won't suggest it) a <collision data filename> <map directory> Regenerate an old server_attr to server_attr.new using the current lzo compression and cleaning useless flag CLICK c <filename> Other stuff such as b to create a character instance or q to quit About the SkyBox Bottom pic fix: (since v21) Both metin2launch.exe and worldeditor.exe should be edited to see the bottom pic of the skybox. Ymir messed up the code wrongly flipping the bottom image. Open ./Srcs/Client/EterLib/SkyBox.cpp and replace: ////// Face 5: BOTTOM v3QuadPoints[0] = D3DXVECTOR3(1.0f, -1.0f, -1.0f); v3QuadPoints[1] = D3DXVECTOR3(1.0f, 1.0f, -1.0f); v3QuadPoints[2] = D3DXVECTOR3(-1.0f, -1.0f, -1.0f); v3QuadPoints[3] = D3DXVECTOR3(-1.0f, 1.0f, -1.0f); with: ////// Face 5: BOTTOM v3QuadPoints[0] = D3DXVECTOR3(1.0f, 1.0f, -1.0f); v3QuadPoints[1] = D3DXVECTOR3(1.0f, -1.0f, -1.0f); v3QuadPoints[2] = D3DXVECTOR3(-1.0f, 1.0f, -1.0f); v3QuadPoints[3] = D3DXVECTOR3(-1.0f, -1.0f, -1.0f); then recompile. Credits:

M2 Download Center Download Here ( Internal ) [Hidden Content] Client side is from 2018 official root. Mount transmutation 2018 didn't exist in root, I made minor edits. However, to use mount transmutation, you need to edit it according to your own mount system. I created a new slot effect so that it doesn't interfere with other systems (highlight) etc. You can use this sloteffect and the diffusecolor function elsewhere. ***Add this before adding this system:

M2 Download Center Download Here ( Internal ) Auto refine option when you upgrade the item with SCROLL or on NPC. I did all checks like example : When you have just one scroll in inventory, refine window will be close. When the item is already maximum upgrade. (+8 to +9 just in case will be succes) and more .. Preview: [Hidden Content] Download : [Hidden Content]

M2 Download Center Download Here ( Internal 2.9 ) Download Here ( Last Release ) This is an archiver I've created, and it looks quite stable so far. The PackMakerLite (PML) supports type 0-1-2-3-4-5-6. As a summarize, the metin2 types are handled like this: Type 0 - only storage (no encryption/compression; it can be read fully from the .epk) Type 1 - compressed - lzo(file) Type 2 - compressed and encrypted - xtea(lzo(file)) Type 3 - encrypted with Panama - you must save an .iv key server-side in the panama/ folder. (content readable only after auth phase) The official used it only for patch2. Type 4 - encrypted with a mix of ciphers (cshybridcrypt) - you must save a .dat key server-side in the package/ folder. (content readable only after auth phase) Practically all the metin2_patch files. Type 5 - like type 4, but a server-side map/<map_name> is also provided. (content readable only after accessing the <map_name> map as a player) The official used it only for the catacomb data. Type 6 - compressed and encrypted - xtea(snappy(file)) Usage: Its settings (xtea keys, extensions, pack types to use) can be changed inside PackMakerLite.json: You can actually integrate the tool in the menu context (running the .reg files) for packing folders and unpacking .eix files: Remove "--nolog" from the .bat files if you want to see the logs again. Command-line options get overwritten by JSON config options. Last but not least: since the client handles all the filenames in lowercase, this tools automatically converts them as well. Thanks also to: blackdragonx61 / Mali - type4-5 extract code / type 6 compress code metin2team - type6 extract code By martysama0134

M2 Download Other Mirrors Download Here ( GitHub ) Download Here ( MEGA ) A Mini Version of the official chatting window renewal. All settings are saved in UserData/chatting/<character_name> using the cPickle module in C, a powerful algorithm for serializing and de-serializing a Python object structure, also used by Webzen.

M2 Download Center Download Here ( Internal ) Here is my speedtree models library (size 2GB, over 2200 spt, 2500 textures). Most of the trees are ready to save in sptCAD3 but remember to save textures as .dds. [Hidden Content] I hope it will be usefull for you If you have any question send me a message.

You too? You want to create a server for our favorite MMORPG?! You will be able to make your dream come true ! This guide is exclusively compatible with Metin2 Project. Are you ready? Gooo! Install the Virtual Machine Spoiler Prerequisites Download and install the latest version of VirtualBox Download the latest version of the Metin2 Project Virtual Machine Storage: 25GB RAM: 2GB Introduction VirtualBox is virtualization software. A Metin2 Server runs mostly on an operating system called FreeBSD. It's therefore necessary to virtualize a second computer within yours to operate your Metin2 Project Server. It's the virtualization of a second operating system that consumes resources in processor, RAM and storage on the host system, your computer. If you are using a dedicated server, you will install FreeBSD as the main operating system without using Windows! The Metin2 Project Virtual Machine is ready to use, it's already preconfigured to be usable, even for a neophyte! Ready? Gooo! You need to open the « OVA » file by clicking on it, like to open your favorite software. The extension is recognized automatically by Windows and is associated with VirtualBox. You must click on the button « IMPORT » and let VirtualBox work, it imports your Metin2 Project Virtual Machine for your greatest happiness ! It has successfully imported your Metin2 Project Virtual Machine! Congratulations ! Configure the Virtual Machine Spoiler Introduction By default, your Metin2 Project Virtual Machine is partitioned into a local network within your computer. This manipulation consists of making your router and your virtual machine communicate and allowing it access to the Internet network. Ready? Gooo! You must click on the name of your virtual machine then click on « CONFIGURATION ». A part that is very important, this is where you give your virtual machine the power to connect to the world and control all of us ! Click on « NETWORK » and choose « BRIDGED ADAPTER » then select the primary network card that your computer uses, « WIFI » or « ETHERNET ». You also have the possibility to modify the various parameters of your virtual machine, such as the RAM, the power of the processor... Click the « OK » to save the changes. Manage the Virtual Machine Spoiler Introduction It's important to know how to manage a virtual machine, starting it and shutting it down are actions that you are likely to perform regularly when managing your Metin2 Project Server. Ready? Gooo! All you have to do is start your Metin2 Project Virtual Machine ! For that, it's very simple you have to right click on the name of your virtual machine and it will offer you several choices including: « START » or « CLOSE » when you want to turn it off. When it has finished starting, you must have this on your screen, you must identify yourself using the identifiers that are available on the topic where you downloaded Metin2 Project, when entering the password it will not be displayed no, this is absolutely normal. So here you have the main interface between your computer and your virtual machine, it's a bit like your second screen! It must imperatively remain open otherwise it would turn off your computer . Trick It's possible to restart your Metin2 Project Virtual Machine using a command! When you are connected and identified on the VirtualBox interface or using PuTTY, all you have to do is enter the following command then validate with the « ENTER »key on your keyboard: reboot Retrieve the IP Address Spoiler Introduction An IP address is like your postal address, if we don't know it, we can't know where you are. An IP address represents the postal address, the location of your Metin2 Project Virtual Machine on your network. Ready? Gooo! You will retrieve the address of your virtual machine, it has an address, a home and it does not pay rent! This address, which is exclusively numeric is the IP address, it's specific to each computer, whether physical or virtual. You will be able to connect to the various tools to manage your Metin2 Project private server but also to connect to the game! For that, it's very simple you have to enter the following command in the VirtualBox interface: ifconfig In our example, the IP address of the virtual machine is: « 192.168.0.21 ». Use PuTTY Spoiler Prerequisites Download the latest version of PuTTY Introduction PuTTY is an SSH client, it allows you to connect to your FreeBSD Server in SSH. It's more or less similar to a remote control software like AnyDesk or TeamViewer except that it's used in command line! This saves you the uncomfortable interface of VirtualBox. PuTTY being much more ergonomic for copying and pasting commands... Ready? Gooo! Enter the IP address in the field: Host Name (or IP address) Enter the SSH port in the field: Port (Default: 22) Enter a name you want in the field: Saved Sessions Click on the « SAVE » button to save the connection parameters You must double click on the registered server of your choice to initiate a connection. PuTTY will ask you for the username and password of your FreeBSD user, this corresponds to the credentials used on your VirtualBox interface. It may also ask you to confirm the connection to the SSH Server and indicate a security problem, don't panic and click on « YES ». Use EterNexus Spoiler Prerequisites Download the latest version of EterNexus Download the Metin2 Project Client Introduction EterNexus is a software which will allow you to decompress and compress the « EIX » and « EPK » archives of the « PACK » folder of your Metin2 Project Client, these archives contain absolutely all the game data, images, texts, models, textures... Ready? Gooo! You have to extract the files from EterNexus and move them to the « PACK » directory of your Metin2 Project Client. You will find a folder with the same name of the archive that you unzipped in the directory where the archive is located. To unzip an archive: EterNexus will recreate a new archive with the same name of the folder and in the same location where the same directory is located. To compress an archive: Configure the Metin2 Project Client Spoiler Prerequisites Download and install the latest version of Notepad++ Download and install the latest version of WinRAR Introduction It's necessary to link your Metin2 Project Client to your Metin2 Project Server, for this we will enter the IP address of your server within the game client configuration. Ready? Gooo! You must first extract the Metin2 Project Client archive. In order to configure your Metin2 Project Client and link it to your Metin2 Project Virtual Machine, you must configure the IP address within your Metin2 Project Client. You must extract the archive « ROOT » and you will find a multitude of files there, the one that interests us is « SERVERINFO.PY », it contains all the information about your server, the IP address, the name, the port of access... At the beginning of this file, there is a list of sample servers to guide you through the changes. At the beginning of the file you must find the following block: SRV_LOCALHOST = { 'name':'LOCALHOST', 'host':'127.0.0.1', 'auth':11002, 'c1':13001, 'ids':'10', } You need to modify the line similar to: 'host':'XXX.XXX.XXX.XXX', You must replace « XXX.XXX.XXX.XXX » by the IP address of your Metin2 Project Virtual Machine then save the changes. After that, you simply need to compress the « ROOT » archive. This means that when you run the Metin2 Project Client, you will need to select the « LOCALHOST » server. Use Navicat Spoiler Prerequisites Download and install the latest version of Navicat Introduction Navicat is a graphical database management and development software suite, it will allow you to manage your databases and the data stored in them. Navicat is not limited to MySQL, it's also able to connect to other SQL Servers such as PostgreSQL, Oracle, SQLite, MariaDB... As part of Metin2 Project, we use MySQL, the database records and stores all data relating to your Metin2 Project Server, accounts, characters, inventories, state of quests... Ready? Gooo! To start the configuration of Navicat, you must click on « CONNECTION » then choose « MYSQL », MySQL is the engine of our database used in Metin2 Project. Logins are available on the topic where you have downloaded Metin2 Project. Enter the name you want in the field: Connection Name Enter the IP address in the field: Host Enter the MySQL port in the field: Port (Default: 3306) Enter the username of a public account in the field: User Name Enter the password associated with your user in the field: Password Check the box: Save password In order to ensure that the connection is established, you can click on the button: « TEST CONNECTION » if you have the message below, everything is good! It only remains to confirm by clicking twice on the buttons: « OK ». To connect to a MySQL Server, you must double click on the name of the previously added server. In the left part of Navicat, to see all the data of your Metin2 Project Server you must click on « TABLES ». To open a data table, also double click on it. Create an Account on Metin2 Project Spoiler Prerequisites Encrypt password Ready? Gooo! Creating an account on your Metin2 Project Server is easy, for that we will use Navicat to connect to the MySQL Server. We are going to modify the « ACCOUNT » table, it's located in the « ACCOUNT » database. To manually add an account from Navicat, you must click on the « + » at the bottom left and fill in the boxes, these fields are the most important, everything else is optional and will be filled in automatically with the default settings: ID: Do not fill, it fills automatically LOGIN: The username of the account we use to connect to the game client PASSWORD: This is the password, which you must first encrypt SOCIAL_ID: This is the code for deleting a character EMAIL: This is the email address of the account CREATE_TIME: Account creation date STATUS: Account status, « OK » or « BLOCK » if he should be banned SECURITYCODE: ? AVAILDT: ? MILEAGE: DC CASH: MD GOLD_EXPIRE: Double Drop Chance for Items SILVER_EXPIRE: 50% More experience SAFEBOX_EXPIRE: More storage space in the Warehouse AUTOLOOT_EXPIRE: A Hand that Automatically Picks Up Yangs FISH_MIND_EXPIRE: The chance of catching a Fish increases MARRIAGE_FAST_EXPIRE: Love points increase faster MONEY_DROP_RATE_EXPIRE: Double Chance of Yang Drop LAST_PLAY: Last login date This ensures that your passwords are not in the clear in your database, a measure of security and confidentiality. Finish by pressing the « ENTREE » key on your keyboard to confirm and save. Assign « GM » permissions Spoiler Introduction Adding permissions to a user involves a lot of responsibility, for this we will use Navicat to connect to the MySQL Server. We are going to modify the « GMLIST » table, it's located in the « COMMON » database. To manually add an account from Navicat, you must click on the « + » at the bottom left and fill in the boxes: MID: Do not fill, it fills automatically MACCOUNT: The account ID the one to use to connect with the game client MNAME: This is the name of the character, it must be strictly identical, if it's not yet existing, it does not matter, the important thing here is to choose a name that will be that of your character MCONTACTIP: The box is empty by default, however some explanations: this allows the rights to be assigned to an account according to the player's IP address, this prevents someone from connecting to the account to take advantage of the accesses, to be avoided if the player to a dynamic IP address MSERVERIP: The box is on « ALL » by default, however some explanations: this is in the case where you have several Metin2 servers running on the same FreeBSD Server, this allows you to assign access to a particular server, it requires adding the server IP in the « GMHOST » table MAUTHORITY: This is the level of access rights in play, you can check the access level of an order from the sources of Metin2 GOD: Limited access HIGH_WIZARD: Limited access WIZARD: Limited access LOW_BIZARD: Limited access IMPLEMENTOR: Full access Finish by pressing the « ENTREE » key on your keyboard to confirm and save. You have defined the accesses, you must reload them, two solutions: You have an account with an already existing GM character, you must write this in-game command and disconnect / reconnect the concerned account: « /RELOAD A ». You don't have any GM characters, you have to stop and restart the Metin2 Project Server with the Metin2 Project Shell Manager. At this stage, the server has not started, the next start of the Metin2 Project Server will suffice to update your character's accesses. Use WinSCP Spoiler Prerequisites Download and install the latest version of WinSCP Introduction WinSCP is a graphical SFTP client for Windows. It uses SSH and is open source. The purpose of this program is to enable secure copying of files between a local computer and a remote computer. You will use it to transfer files to it. With WinSCP you will be able to explore the content of your Metin2 Project Virtual Machine as if you were on your computer with Windows and its file explorer. You will find there the files of the FreeBSD operating system, the programs which have been installed, but also, most importantly, the files of our Metin2 Project Server. Ready? Gooo! When you open the program for the first time, it automatically offers you the connection manager: Enter the IP address in the field: Host name Enter the SSH port in the port number: Port number (Default: 22) Enter Username: root: in the field: Username Enter the password for: root: in the field: Password Click on the button: Save... Enter the name you want in the field: Save session as Check the box: Save password (not recommended) Click on the button: OK To initiate the connection, you must double click on the server you have registered. WinSCP will automatically connect with the username and password that have been registered. It may also ask you to confirm the connection to the SFTP Server and announce a security issue, don't panic, click « YES ». Start the Metin2 Project Server Spoiler Prerequisites Using Metin2 Project Shell Manager Introduction Metin2 Project comes with a powerful program, Metin2 Project Shell Manager. It allows you to manage your Metin2 Project Server with ease! Ready? Gooo! To invoke it, you need to run this command on PuTTY: cd /usr/m2_project && sh m2sh.sh You have a multitude of options available to you that allow you to manage Metin2 Project as simply as possible. Each time you run the above command, you must choose one of these options by entering it and then validating it with the « ENTER » key on your keyboard. Enter: 103 Ready? Gooo! Spoiler Introduction It's time for you to materialize in the virtual and wonderful world of Metin2 Project ! Enjoy the great and beautiful Metin2 Project adventure... Made With and

Hey m2dev You summon a lot of monsters, they attack your character and then you kill or purge monsters, but the damage still continues to be shown visually. Is this a familiar situation? In addition, the damage is shown visually even after the death of the character... I love this game. I haven't seen a fix for this problem, let's try to fix this sh.. [Hidden Content] I'm not saying that this is an ideal solution. If you have any ideas, please write comments. Best regards, Masha

M2 Download Center Download Here ( Internal ) Hi, from what I saw some of you are looking for a tutorial wich is showing you how to upgrade the granny version from 2.9 to 2.11.8 so I thought I have a tutorial for you guys. I explained as much as possible that no one has any error. Otherwise any error leave a reply. Thanks in advance and good luck! [Hidden Content]

M2 Download Center Download Here ( Internal ) Download Here ( GitHub )

So a year passed and my 2 false positive increased to 16 (Virustotal). (Still not 38 like the guy above but it's high enough..) Anyone have any idea what part of the code cause these alerts or how to fix? While it's the best open source patcher it's not really usable now, because the 16 hit contains Malwarebytes/Microsoft/ESET-NOD32/GData and those are pretty popular.

Mega : Here M2DL : Here

Hello, I have a question, is it possible to fully unpack the global server properly? In one of the updates there was an improvement to Have_dungeon, but unfortunately the models cannot be opened in granny, which causes me a problem with reassigning new textures I leave my zone and maps that were corrected, but unfortunately not every model can be opened in granny [Hidden Content] [Hidden Content]==

M2 Download Center Download Here ( Internal ) Hi guys, these work took for about 20 minutes to make but seems that players love it. It's just a small retouch for upgrade + so they can be seen wich one are with + and wich are not. And a retouch for stones (color of the stones) Stones +0, +1, +2 have black and white icons Stones +3 have normal color Stones +4 have enchanted color (usfeull for searching in shops) Download: Virustotal: [Hidden Content]

GF v21.2.10.0 Patch (Metin2 Download) Contents: root-meta, dumped binary, protos(out of date, types/values will be checked later). 2021 Summer costumes, new pet. All files are unpacked in a folder.

M2 Download Center Download Here ( Internal ) vt: [Hidden Content] Gif TwoHand [Hidden Content] Gif Moonsword [Hidden Content]

M2 Download Center Download Here ( Internal ) Download Here ( GitHub ) Offline Shop - Premium Private Shop System Hi, due to lack of time, I hadn't shared, but ¡Hey!, I'm here and one more contribution. The Official Servers have an Offline for few months ago, so I took on the task of making a similar one, It's not like Official Servers in a some parts of code I think, it does occupy designs and other things but in some issues it's different, but I used the rules that they use in terms of encoding. I hope you like it, I tried that the Offline didn't occupy so many SQL sequences to minimize the load of SQL injections for the server and uses the same methods of the store and stores, don't create new files so that you can observe it. I take this topic to indicate that I don't sell my things because some persons always end up filtering them and it makes me very lazy to think that, I'm selling and providing kind support to good people so that a bad one arrives and simply ends all that, I don't usually give support because I don't received anything... in Yohara's level system some people sent me a message to indicate that there was an error and it was always an error that they installed it wrong, look correctly at the guide and once for real believe that I omitted something in the guide, you can contact me and tell me to fix it, but if it's an installation error and I must install the system for you, I will charge you, I like to help, but I give you a guide so that it is only corrected what I omitted. If you need me to connect it to your code or to add extra functions, I will still charge you, it's not much, it will simply be at your discretion and it will be a voluntary donation for me and my time, you will value how much you give me, it can be 1 EUR, 2 EUR, 3 EUR, 5 EUR I don't know (So I hope you make an effort, I already gave you the most complicated part, is to copy and paste code already done, including other parts for example like Safebox in Safebox part?), Some people were nice and some were not, so I decided to stop placing the rest of Yohara's patches for a few time. I hope you like this, install, test and contact me if you detect an error, I already looked for and corrected everything I observed. About memory leak - Doesn't have, I think . Use WJ_ENABLE_TRADABLE_ICON (public system). The default code in Python is Safebox to avoid code differences. Among other things. I use TRANSMUTATION like TRANSMUTATION, change it to Changelook, as I indicated in some parts of the guide where to change. # Visual Parts You can download the patches from the Official Servers in: Gyazo: [Hidden Content] [Hidden Content] [Hidden Content] [Hidden Content] GitHub: [Hidden Content]

M2 Download Center Download Here ( Internal ) Since some piece of shit ''developer'' decided that it's ok to resell my system, here you go. [Hidden Content] have fun.

M2 Download Center Download Here ( Internal ) Hi, I don't think I have to tell much about this. It'll look like the official one, some code is c&p from the official root files. Most of the own written code is NOT like the offical one. I added a new python module ("renderTarget"), so you don't need methods which officials use, like this: "playerm2g2.MyShopDecoShow( True )" You are able to display more than one render target at the same time. If you want to know more, take a look at the code. If there are any bugs, just message me. Download: [Hidden Content] Password: Cxl.Services

M2 Download Center Download Here ( Internal ) GitHub Repository: [Hidden Content] The tutorial bellow is also available on the repository. Metin2-Patcher-Electron A simple metin2 patcher made in Electron with React and TypeScript. The file verification is made with SHA256. Getting Started Install NodeJS: [Hidden Content] Install Yarn: [Hidden Content] Clone the repository: git clone [Hidden Content] Install the dependencies: yarn install Edit src/config.ts with your own values. Change resources/icon.png with your own logo (should be at least 256x256). Available Commands Command Purpose yarn run start Starts the React App (aka Frontend) in development mode. yarn run build Builds a production ready React bundle. yarn run electron-start Starts the Electron App. yarn run electron-pack Builds a production package of the app. yarn run lint Check for linting errors. yarn run lint-fix Fixing some linting errors. About the Patcher This project was made with the intend of learn more about Electron, something I wanted to do for a while. If the folders don't exist, they'll be created. If the files don't exist they will be downloaded. The patcher checks the local files and if their checksum mismatches the remote checksum, they will get downloaded. This patcher runs the downloads asynchronously, this means it will download multiple files at the same time. The entire project is made in React and Electron both with TypeScript. For CSS was used TailwindCSS. Deploying After editing everything you must use the command yarn run electron-pack to build the application. It will build 2 files inside the release folder: Metin2 Patcher Electron-X.X.X-win.zip metin2_patcher_electron.exe The first file is the full bundle zipped that can be extracted to the client folder (after removing the 2 unnecessary LINCENSE files). DON'T USE THIS IF YOU ALREADY HAVE THE CEF BROWSER ON THE CLIENT. The second file is also zipped but will be extract to a temporary folder during runtime (takes about 3 seconds to fully open) and clean after itself when it closes. This is the way if you can't perform the first option. Development Testing In case there isn't the possibility to use a local webserver (like Apache with Xampp, or Wampp) it may be necessary update the CORS on your remote server. For NGINX Go to the configuration file for the patcher host and add this line: add_header 'Access-Control-Allow-Origin' '[Hidden Content]'; For Apache Go to the configuration file for the patcher host and add this line: Header set Access-Control-Allow-Origin "[Hidden Content]" It may also be needed to activate the headers module: a2enmod headers Web Server Using this NodeJS script, you shall place the client files inside a folder called files and run the script. It will generate the JSON file with the names, sizes and checksum hash of the files. Issues If you have any issues, post here or open an issue on the repository: [Hidden Content]/issues

M2 Download Center Download Here ( Internal ) With this tool you can view the Metin2 Models in the .gr2 Format. It´s an easy to use tool and a must have for every server owner or client modder.

Hi community, Since we have a new presentation now, we decided to release the PSD (Photoshop Data file) of our old one made by the former WoM2 Game Designer, ZuLee. Here's how it looks: Download: [Hidden Content] Enjoy!

Can someone help me to unpack these protos, they are original and I would like to unpack them. Appreciate ! [Hidden Content]

M2 Download Center Download Here ( Internal ) Serverfiles Cartof v4 Contains Systems (all are working perfect, without bugs) * Sash system with scale > [Hidden Content] * Offline shop system + offline shop search system > [Hidden Content] * Alchemy system > [Hidden Content] * Yang limit was increased at 10kkkkk (10.000.000.000.000.000) including offline shop and sash > you can see this in the posted videos up * Belt system * Energy system Improvements * The specific music has been eliminated because I, at least, consider it useless (I think everyone now puts what he wants to listen to, that's my opinion) * The files have been rearranged, many of them deleted => 977MB total client size * You can attack and use the skills (horseback) on any mount * You can not use the Witch Tais and the Aura of the Sword if you do not have a gun * When you are teleporting or dying, your pet will not be chased, but will remain near you * You can not use a wedding suit and another suit at the same time * The commands that could have the server (/dice, /war etc) have been resolved and all (including /dice) * Quickslot ([Hidden Content]) solved * The CMD file containing the required steps to use commands has been removed, the gradation is done directly from the source * The craft bug that caused the server dropout was resolved * The minimum level (40) to create a guild is verified in the source * Blend bug ([Hidden Content]) solved * There was a possibility to squirt the server when you were invited to a guild now there is no such possibility * There was a possibility to drop the server when the / reload q command was used, there is no longer the possibility * There was a possibility that players can be disconnected by using the / messenger_auth command in a module, now can not * When you die you will not have any negative life, but 0 * When you have a stack of books it will only read 1, not all * There is no time between bonus changes * Exploit has been resolved, it does not work anymore I did not pay too much attention to the client, you have the freedom to customize it as you want. I've removed quests, drops, store items, and all else for not taking the serverfile here and within 5 minutes to advertise with the open server. On this occasion I hope you will make your own drops, OX questions etc. For those who wonder what serverfiles I started -> Zearth2 (you can see this when you open the client). Serverfiles download : Serverfiles Cartof v4 Sources (server, binary, dump_proto, config) are for sale on a bundle, they can not be bought in pieces. Careful! I do not sell to anyone. For private message contact me on Skype unknown.rk or live: unknown.rk. Free support to those who purchase the sources. Please refrain from any unnecessary comments and sorry for my english.

Welcome hopeless developers, in an attempt to reduce some random questions, and considering I haven't found anything about this there, I'll share this small method to fix the packet errors, which requires thinking. There's no copy/paste here as it requires you to think of what you modified. This tutorial is, of course, indented for new people not for the rest. If you are interested in how to make a new packet, head here: What is it and how metin2 implementes it? Keeping things simple and understandable, a packet is an information exchanged between the Client or the Server. For example, when you press the button Space (to attack), the client will send an information (which is a packet), which will tell the server that we attacking the player Shiba324. Read this if you are more interested: [Hidden Content] Each packet needs to be identified in an unique way between client and server otherwise the client or server won't understand which thing you are sending, that's why each packet of Metin2 starts with "BYTE bId". We see this numbers inside an enum block (like PACKET_CG_LOGIN2 which identifies the login packet), while it's content is defined inside a struct block (like TPacketGCLogin2). The files which this packets are defines are Packet.h inside UserInterface and game/src. There are two packet types, dynamic and static, the static ones have a fixed length (the structure size), the dynamic have an extra data called (length, usually WORD), which tells the game the size of it. All the packets have a nomenclature, which I'll explain here: CG -> Client to Game (sent by the client) GC -> Game to Client (sent by the server) GG -> Game to Game (used by P2P packets for communicating two cores with eachother) Before seeing how to fix the errors, there's another thing that I will explain called Sequence system. What is the sequence system? It's a system introduced in newer clients (like 34k). It's basically a check which the client will send an extra data after a packet, and the server will verify if it's correct, in case it's not it will kick the player out of the server. The verision system works by sending a different number each time a packet is sent or received to the server, the client can send up to 32768 unique numbers before resetting itself to 0 (it's stored in a big array). Error type 1: Unknown packet header: XXX, last: YYY ZZZ Number explanations: XXX is the packet that the game/client cannot handle YYY and ZZZ are the last two packets sent before this error (usefull for investigating what packet caused this error) This error can happen before of the following issues: You modified the source and you haven't added inside PythonNetworkPhaseGame.cpp or packet_map.cpp the packet You have a packet which size mismatches between client and server Error type 2: SEQUENCE XXXXXXX mismatch 0xYY != 0xZZ header KK This error could happen for some reasons: You specified a packet which uses the sequence in packet_info (last value true/false) and in the client you forgot to add "SendSequence()" or viceversa You have a packet which size mismatches between client and server (the server is thinking a packet data is a sequence data) Error type 3: We don't really have syserrs here but we can see the client fuzzying around or doing wacky things (even crash at some point!) or the server/client fails to process all the data sent. This error could happen for some reasons: You have a packet which size mismatches between client and serve You forgot to add a Send() or forgot to Recv() the data inside the client tl;dr: always check for the following things if you are unsure: Check if you have added SendSequence and modified the true/false in packet_info (if you use sequence system) ALWAYS CHECK if Packet.h has the same ID and structures Check what action causes the issue so you can track down the code Always check the last headers sent, most of the time is just a byte not sent at the end Always check your implementation of input_main (Server) and PythonNetworkPhaseGamexxxxxxx (Client) Pro hack tip: __PACKETDUMP__ and ENABLE_SEQUENCE_SYSTEM are cool bois. Good luck.

M2 Download Center Download Here ( Internal ) Here I post the GitHub of the owner of Heavenly Hope file. Most of system are unfinished, bad coded, and I think that the better use to this file is take system and modify it, NOT start server with this file. "This project is not finish, you can use this project for optimize your project. You can also update this project by forking it for help me and every other peoples who want to make a server. This project is free to use and cannot be sell for money. I don't take any responsability of selling or bugs or issues." Service.h Local_inc.h Videos:

M2 Download Center Download Here ( Internal ) Hi, ricky released his MDE tool today. I'll post it on this forum. There is simple video how to use it, it's really easy for everyone! [Hidden Content] There is a simple video how to make animation UVW textures. Download here: [Hidden Content] Credits: ricky92 For tool martysama0134 for the Unwarp_UVW fix (Texture fix)

[Hidden Content]

On Google you can find some solution. [Hidden Content]

Solved. [Hidden Content]

This "converter" won't work for source I already converted the source, took about an hour, but I get stupid crashes. I think you really have to be carefully in converting it to dx9, otherwise there will come up many errors. dx8 is really bad and yes we could add vertex and pixel shaders for textures, then it wouldn't look so crappy anymore. If we get enough helpers, we could open a github page for dx9 version source code changes. What do you think? Talking about VC 10. Here you can see the changes from DX8 to DX9 : [Hidden Content](v=vs.85).aspx