Leaderboard

M2 Download Center Download Here ( Internal ) Hey there, I have an Halloween gift for you all. i have been working for a few hours on official like element image on target window(See screenshots below). When you click on a mob if it is defined as elemental, it will open an element image in addition to the target window. Don't forget to hit the like button! (C) Metin2 guild wars - coded by [GA]Ruin - 27/10/2017 (I create custom metin2 systems in c++/python. if you want a custom system send me a pm and we can talk over skype). Let's begin! Server Side: Open service.h, add in the end: #define ELEMENT_TARGET Open char.cpp, search for else { p.dwVID = 0; p.bHPPercent = 0; } add below: #ifdef ELEMENT_TARGET const int ELEMENT_BASE = 11; DWORD curElementBase = ELEMENT_BASE; DWORD raceFlag; if (m_pkChrTarget && m_pkChrTarget->IsMonster() && (raceFlag = m_pkChrTarget->GetMobTable().dwRaceFlag) >= RACE_FLAG_ATT_ELEC) { for (int i = RACE_FLAG_ATT_ELEC; i <= RACE_FLAG_ATT_DARK; i *= 2) { curElementBase++; int diff = raceFlag - i; if (abs(diff) <= 1024) break; } p.bElement = curElementBase - ELEMENT_BASE; } else { p.bElement = 0; } #endif open packet.h, search for: } TPacketGCTarget; add above: #ifdef ELEMENT_TARGET BYTE bElement; #endif Client side: open locale_inc.h, add in the end: #define ELEMENT_TARGET open packet.h, search for } TPacketGCTarget; add above: #ifdef ELEMENT_TARGET BYTE bElement; #endif open PythonNetworkPhaseGame.cpp, look for: else if (pInstPlayer->CanViewTargetHP(*pInstTarget)) replace below with the following: #ifdef ELEMENT_TARGET PyCallClassMemberFunc(m_apoPhaseWnd[PHASE_WINDOW_GAME], "SetHPTargetBoard", Py_BuildValue("(iii)", TargetPacket.dwVID, TargetPacket.bHPPercent, TargetPacket.bElement)); #else PyCallClassMemberFunc(m_apoPhaseWnd[PHASE_WINDOW_GAME], "SetHPTargetBoard", Py_BuildValue("(ii)", TargetPacket.dwVID, TargetPacket.bHPPercent)); #endif open PythonApplicationModule.cpp, look for #ifdef ENABLE_ENERGY_SYSTEM add above: #ifdef ELEMENT_TARGET PyModule_AddIntConstant(poModule, "ENABLE_VIEW_ELEMENT", 1); #else PyModule_AddIntConstant(poModule, "ENABLE_VIEW_ELEMENT", 0); #endif open game.py, look for def SetHPTargetBoard(self, vid, hpPercentage): if vid != self.targetBoard.GetTargetVID(): self.targetBoard.ResetTargetBoard() self.targetBoard.SetEnemyVID(vid) self.targetBoard.SetHP(hpPercentage) self.targetBoard.Show() replace with: if app.ENABLE_VIEW_ELEMENT: def SetHPTargetBoard(self, vid, hpPercentage,bElement): if vid != self.targetBoard.GetTargetVID(): self.targetBoard.ResetTargetBoard() self.targetBoard.SetEnemyVID(vid) self.targetBoard.SetHP(hpPercentage) self.targetBoard.SetElementImage(bElement) self.targetBoard.Show() else: def SetHPTargetBoard(self, vid, hpPercentage): if vid != self.targetBoard.GetTargetVID(): self.targetBoard.ResetTargetBoard() self.targetBoard.SetEnemyVID(vid) self.targetBoard.SetHP(hpPercentage) self.targetBoard.Show() open uitarget.py, look for import background add below: if app.ENABLE_VIEW_ELEMENT: ELEMENT_IMAGE_DIC = {1: "elect", 2: "fire", 3: "ice", 4: "wind", 5: "earth", 6 : "dark"} look for: self.isShowButton = False add below: if app.ENABLE_VIEW_ELEMENT: self.elementImage = None inside Destroy method, look for: self.__Initialize() add below: if app.ENABLE_VIEW_ELEMENT: self.elementImage = None inside ResetTargetBoard method, look for: self.hpGauge.Hide() add below: if app.ENABLE_VIEW_ELEMENT and self.elementImage: self.elementImage = None look for : def SetElementImage(self,elementId): add above: if app.ENABLE_VIEW_ELEMENT: def SetElementImage(self,elementId): try: if elementId > 0 and elementId in ELEMENT_IMAGE_DIC.keys(): self.elementImage = ui.ImageBox() self.elementImage.SetParent(self.name) self.elementImage.SetPosition(-60,-12) self.elementImage.LoadImage("d:/ymir work/ui/game/12zi/element/%s.sub" % (ELEMENT_IMAGE_DIC[elementId])) self.elementImage.Show() except: pass Compile server, client source and root pack and that's it! Enjoy! Happy halloween!

Let me advertise Plechito's work https://plechito.com/

M2 Download Center Download Here ( Internal ) Download Here ( Latest Version ) This WE is a version compiled directly by me which includes infinite fixes and features. It's certain that you won't longer use the worldeditor_en! To make it simple, I wrote all the details about this feature and the common WE inside the relative config file: (called WorldEditorRemix.ini) ; Info: ; -) 100% translated ; -) granny2.11 ; -) F6 as Insert alternative ; -) many default features not present inside the worldeditor_en (probably, that binary was taken out from an SVN long time ago and resource hacked) such as Ins for all regions and skyboxes ; -) WASD UPLEFTDOWNRIGHT to move around (+asynchronous diagonally movements) ; -) UP-LEFT-DOWN-RIGHT to move around*10 (+asynchronous diagonally movements) ; -) config file for few things ; Output options by default ; few others such as default WASD movement ; whether or not Insert should let you go where you were before the press ; no MAI dump when saving atlas ; whether or not DevIL should compress and remove alpha from minimap.dds ; whether or not loading .mdatr building heights ; default textureset when creating maps ; overlapped tabs ; other stuff ; -) several bugfixes ; default title app name ; attempting to write to an empty textureset name when creating new maps ; ViewRadius doubled every load&save ; shadowmap.dds creation ; assert when saving atlas ; crash when adjusting height ; many buffer under/overflows ; *.mdc collision data saving (for game_test) ; not checking output options when loading maps ; water brush waterid bug (the id was increased until 256 each time the function was called; now it's based on the water height just like it should be) ; init texture map reload map crash and last 2px always blank ; square shape even for up/down height brushes ; add textureset texture button (+multiselection) ; remove textureset texture feature (just selecting a texture from the list and pressing DELETE) ; creation of empty textureset with index -1 (changed to 0) ; change baseposition button ; misspelled stuff ; skybox bottom image (nb: you also need a fixed launcher for this) ; removed boring CTRL requirement (to move the camera) when editing daylight/attr ; fixed refresh texture imagebox onKey pressing the down/up keys (like when onClicking them) ; fixed TextureSet file creation if not existing ; fixed new wolfman motion event handling ; fixed crash when editing animation attack bones and 00010.gr2 was missing ; fixed locale/ymir/mob_proto load (it autodetects the most common structures) and <map>/regen.txt load/save ; fixed ./group.txt load ; fixed load/save/edit <map>/regen.txt (very nice for "m" regens, untested for "g") ; load from PACK is available if pack/property is present! Be sure pack/Index exists! ; fixed multi-object selection crash ; fixed crash when previewing a missing texture ; fixed not clearing of old environment (e.g. skybox) when switching maps ; fixed not creating property folders in root tree (object tab) ; fixed object attachment in Model Tab ; fixed newly particles names in Effect Tab ; fixed crash when saving a .mse script with no mesh model ; fixed crash when inserting a lower gradient ; -) created new TextureSet field when creating new maps ; -) created new Change/Delete Texture buttons when double-clicking a texture ; -) created Background Music playback and Shadow Recalculate buttons ; -) created water height "set 0z", "+1z", "-1z" buttons ; -) server_attr generator ; -) every crash will generate a logs/WorldEditorRemix_{target}_{date}.dmp file useful for debugging ; -) implemented a "water path" mapsettings option (the launcher requires additional code) ; -) implemented a "wind strength" msenv option (the launcher requires additional code) ; -) the "encrypt data" feature does nothing (unimplemented) ; Note: ; 0) there are no regressions in this version! a bug here means it'd also be present in older WE versions too! ; 1) the shadow output option is tricky: when UpdateUI is called, shadows are hidden although the check is pressed (i implemented the shadow recalculate function for that) #fixed since v11 ; 2) the bgm player requires /miles and the fadein/out doesn't work until you load the map ; 3) the adjusting height button works only if mdatr height is detected ; 4) the Debug version is laggy when working on maps such as n_flame_dungeon and n_ice_dungeon (by default, because SphereRadius are intensively checked in SphereLib\spherepack.h) ; 5) if you load a map, the script panels (where you load .msa et similia) will have the camera perspective a little fucked up (0z instead of -32767z or 0x 0y -163,94z) ; 6) few tree objects are not movable and/or highlightable after placed on the ground and their selection is invisible (you can still delete 'em) ; trick: draw a square selecting a normal building and 'em, then move the building and you'll see all of 'em will be moved! ; 7) the server_attr generator will clean all the unused flags! attr[idx]&=~0xFFFFFFF8; ; 8) you can read files from pack/Index 'n stuff but be aware that Property will not be considered! #fixed since v15 ; 9) the MonsterAreaInfo features are laggy and buggy as fuck ; 10) even though you can select many textures at once (using ctrl+click on textureset list; for brushing or initializing a base texture), you can't delete more than one at the same time ; 11) the .mdatr height is tricky; if you move a building, the height will not be refreshed until you put a new building or whatever you want to trigger the update event ; 12) by default, the worldeditor tries to render only the first 8 terrain textures of a 32x32px region (nb: a 1x1 map is a 256x256 px region) ; 13) the minimap rendering cannot catch the buildings/trees inside the first 2x2 regions due a ymir cache fault and you need to set the camera to "see" them ; 14) when the textureset, environment, etc load fails, the old filename still remains loaded ; 15) the attr flag "3" (three) has no implementation, so don't use it! ; 16) load from PACK doesn't load texturesets from files for first (if they are already in pack/), and the object placer's object list will remain empty because it takes the list from property/ (and not from pack/property) ; 17) to save the regen.txt you press CTRL+S ; 18) if you enable the wireframe (f4) when on Attr Tab, you see the terrain all white ; 19) the water brush disappears when the camera renders the waterwheel small/big effect ; 20) the monster area info goes under ground if you're outside the relative sectree ; 21) the full skybox may be displayed only after the top picture has been added (if the other textures have already been inserted) ; 22) the slider in the Attr Tab is something like "16 photoshop layers" in which you can split your attrs; not so helpful and quite confusing sometimes ; 23) the fixed model - object attachment attaches static objects (hairs'skeleton will not mirror the playing animation) ; 24) in environment tab, if you insert lower gradients, you may end up with an out of range crash #fixed since v30 ; 25) brushes working out-of-screen/map-range may affect random terrain places ; TODO: ; A) look at more than 8 textures for region -> DONE ; B) create a shortcut to fix the #5 note -> DONE ; C) disable the radius <= GetRadius()+0.0001f check to fix the #4 note -> REJECTED ; the worldeditor_en calls this assert and, if ignored, the lag ceases to exist (this will not occur in source version) ; at least, if the release version is not a problem for you, use that in those few cases when .mse are abused and try to kill the debug one ; D) translation in more languages other than english -> REJECTED ; english should be enough! ; E) alternative path for d: -> REJECTED ; you can mount d as a subpath of c like this: ; subst d: "c:\mt2stuff" ; F) need to fix note #19 #25 -> TODO [shortcuts] ; ### SHORTCUTS ; # ESC(ape) Clean cursor ; # Canc(el|Delete) Delete stuff such as selected buildings ; # Ctrl+S Save map ; # Ins(ert) or F6 Save shadowmap|minimap.dds ; # F3 BoundGrid Show/Hide ; # F4 Render UI Show/Hide ; # F11 WireFrame Show/Hide ; # R Reload Texture ; # Z and X Decrease/Increase Texture Splat by 0.1 ; # CapsLock Show GaussianCubic effect if shadows are displayed ; # L-Shift+1-6 Show TextureCountThreshold flags (&2-7) as colors on the ground ; # L-Shift+8 Set Max Showable texture to 8 (de-fix note 12) ; # L-Shift+0 Set Max Showable texture to 255 (fix note 12) ; # H Refresh MDATR Heights (useful when you move an object) (fix note 11) ; # Y Set Perspective as default (fix note 5) ; # T Set the Camera to catch all the object on the screen (w/a note 13) then you'll be ready to press Insert/F6 ; # DO NOT HAVE AN OBJECT SELECTED WHEN USING THOSE SHORTCUTS (MW1-7) ; # MouseWheel+1 move cursor x rotation ; # MouseWheel+2 move cursor y rotation ; # MouseWheel+3 move cursor z rotation ; # MouseWheel+4 move cursor height base (1x) ; # MouseWheel+5 move cursor height base (0.5x) ; # MouseWheel+6 move cursor height base (0.05x) ; # MouseWheel+7 move cursor ambience scale (1x) ; # MouseWheel+Q move selected object height base (1x) ; # MouseWheel+9 move selected object x position (1x) (+asyncronous) ; # MouseWheel+0 move selected object y position (1x) (+asyncronous) ; # MW+RSHIFT+9|0 as above but *10x (+asyncronous) ; # MW+RCONTROL+9|0 as above but *100x (+asyncronous) ; # MouseLeft Insert Objects ; # MouseRight Move camera (it could require CTRL too) ; # SPACE Start move/selected animation in Object/Effect/Fly CB ; # ESC Stop animation in Effect/Fly CB [config] ; ### CONFIG OPTIONS VIEW_CHAR_OUTPUT_BY_DEFAULT = 1 VIEW_SHADOW_OUTPUT_BY_DEFAULT = 1 VIEW_WATER_OUTPUT_BY_DEFAULT = 1 ; WINDOW_HEIGHT_SIZE = 1080 ; WINDOW_WIDTH_SIZE = 1920 WINDOW_FOV_SIZE = 45 ; #100 = 1px (minimal px movement when pressing WASD) WASD_MINIMAL_MOVE = 100 ; came back from where you were before pressing Insert/F6 NO_GOTO_AFTER_INSERT = 1 ; disable MAI dumps when saving atlas and/or pressing Insert/F6 NOMAI_ATLAS_DUMP = 1 ; disable minimap.dds alpha saving and enable compression NOMINIMAP_RAWALPHA = 1 ; enable .mdatr height collision loading when moving on buildings or adjusting terrain DETECT_MDATR_HEIGHT = 1 ; disable fog when loading maps NOFOG_ONMAPLOAD = 1 ; refresh all checkbox configurations when loading maps 'n stuff REFRESHALL_ONUPDATEUI = 0 ; set a default mapname prefix when creating new maps ("" to disable) NEW_MAP_MAPNAME_PREFIX = "metin2_map_" ; display a default textureset when creating new maps ("" to disable) ; note: it loads the filepath if exists, otherwise it will create an empty textureset file NEWMAP_TEXTURESETLOADPATH = "textureset\metin2_a1.txt" ; create a default textureset as "textureset/{mapname}.txt" ; note: this option is not considered if NEWMAP_TEXTURESETLOADPATH is not empty. [before v24] ; note: this option is not considered if the TextureSet path input is not empty when creating a new map [since v24] NEWMAP_TEXTURESETSAVEASMAPNAME = 1 ; remove the weird attr flags from the generated server_attr SERVERATTR_REMOVE_WEIRD_FLAGS = 1 ; show diffuse lighting to object VIEW_OBJECT_LIGHTING = 1 ; path of mob_proto used for regen MOB_PROTO_PATH = "locale/ymir/mob_proto" ; select monster area info checkbox at startup VIEW_MONSTER_AREA_INFO = 0 ; brush cursor / object selection color RGB float between 0.0 to 1.0 (default: green -> 0 1 0) RENDER_CURSOR_COLOR_R = 0.0 RENDER_CURSOR_COLOR_G = 1.0 RENDER_CURSOR_COLOR_B = 0.0 Download: [Hidden Content] How To Map: This release will not cover this part. Look at CryPrime`s tutorials to understand how to do it. About the ServerAttr Generator: (since v14) This is a beta function but it should work fine. I tested it on gm_guild_build (1x1), metin2_map_a1 (4x5), metin2_map_trent (2x2), metin2_n_snowm_01 (6x6) and the result was the same as the blackyuko map editor. (I use a different lzo version and I clean deprecated and useless flags, so the size is different from this last one but the "final image" will be the same; using game_test to fix his server_attr will let mine and his perfectly equal byte per byte) I also give you the source code of my server_attr generator function. CLICK A server_attr file is based on all the attr.atr files merged into a one raw RGBA image and each one scaled from 256x256 to 512x512. After that, the image will be splitted into sectors of 128x128 px and each one compressed using lzo compression. The server_attr header is composed by the size of the map*4. (e.g. a 4x4 will have a 16x16 size with 256 sectors inside) (gj ymir CLICK) An uncompressed server_attr sector is just like this: CLICK (the sub 4 byte header is the size returned by the LzoCompress which indicates how much the compressed sector data are large) Each attr.atr is just like this: CLICK (the header is composed of 6 byte in total: 3 WORDs respectively for version, width and height; they are always 2634, 1, 1 so don't bother about it) A single attr.atr scaled from 256x256 to 512x512 will be just like this: CLICK You can use the game_test (from source) to perform few tasks like: Create a server_attr from a .mcd file (I won't suggest it) a <collision data filename> <map directory> Regenerate an old server_attr to server_attr.new using the current lzo compression and cleaning useless flag CLICK c <filename> Other stuff such as b to create a character instance or q to quit About the SkyBox Bottom pic fix: (since v21) Both metin2launch.exe and worldeditor.exe should be edited to see the bottom pic of the skybox. Ymir messed up the code wrongly flipping the bottom image. Open ./Srcs/Client/EterLib/SkyBox.cpp and replace: ////// Face 5: BOTTOM v3QuadPoints[0] = D3DXVECTOR3(1.0f, -1.0f, -1.0f); v3QuadPoints[1] = D3DXVECTOR3(1.0f, 1.0f, -1.0f); v3QuadPoints[2] = D3DXVECTOR3(-1.0f, -1.0f, -1.0f); v3QuadPoints[3] = D3DXVECTOR3(-1.0f, 1.0f, -1.0f); with: ////// Face 5: BOTTOM v3QuadPoints[0] = D3DXVECTOR3(1.0f, 1.0f, -1.0f); v3QuadPoints[1] = D3DXVECTOR3(1.0f, -1.0f, -1.0f); v3QuadPoints[2] = D3DXVECTOR3(-1.0f, 1.0f, -1.0f); v3QuadPoints[3] = D3DXVECTOR3(-1.0f, -1.0f, -1.0f); then recompile. Credits:

M2 Download Center Download Here ( Internal ) Hi, folks! With this guide you will be able to combine textlines with images, like rubinum does. Usage is simple: emojiTextLine.SetText("|Eemoji/key_ctrl|e + |Eemoji/key_x|e + |Eemoji/key_rclick|e - Direct sell") The files are located in the icon pack, so basically the code will load from icon/{GIVEN_PATH}.tga - in the sample the path for the X is: icon/emoji/key_x.tga Here are the images from rubinum client:  Howto: Have fun Sorry for arab players , for sure they have also developers, so let's go guys, finish it ? If you have problem, maybe I made a mistake in the guide of missed out something, just leave a comment below. PS.: Sometimes the code tag of the board puts an extra invisible character mostly the end of the lines, if your IDE cries for syntax error, but it seems correct, check that part of the file with notepad++, it will show a ?(question mark) where the problem is.

M2 Download Center Download Here ( Internal ) Hello, I publish the light version of my ProtoReader here, the light version has one functionality. It converts client item_proto and mob_proto the their server version Input: item_proto mob_proto Output: item_names.txt item_proto.txt mob_names.txt mob_proto.txt Its fully automated just double click on it when its in the same folder as the item_proto and mob_proto. It works like dump_proto but in reverse. Attention! Not every value is included in the clientside proto tables it could happen that you have to change some values on your own. ProtoReader is for old item_proto files (before dragon soul (dragon stone alchemy)). ProtoReaderNewFormat is for the current files. Virustotal: [Hidden Content] You find the download in the attachments. When you like my work and this tool, go and visit: I might also do a Pro Version with some other Features like clientside proto to xml or sql or sql to server item_proto and so

M2 Download Center Download Here ( Internal ) Download Here ( GitHub ) Hello community, this is my first tool shared on the forum, hope it helps a lot as it helped me. I know @Mali61 has already shared the tool on the forum but mine is open source so you can change what ever you want. The code is not the best but it does what it's supposed to, good uses. Credits: @WLsj24 for setting up the base locale_string.txt for translations.

I marked with red what you're looking for. (local_x, local_y, mapindex when you set the target's location) If you don't want to make a target (like treasure hunting or something) then you can use these quest function: pc.get_local_x() pc.get_local_y() pc.get_map_index() I just wrote an example quest for hidden treasure hunting: quest lost_treasure begin state start begin when login with pc.get_map_index() == 255 and pc.getqf("treasure") == 0 begin loop_timer("hidden_treasure", 3) chat("Search the hidden spot!") end when hidden_treasure.timer with pc.getqf("treasure") == 0 begin if pc.get_local_x() >= 100 and if pc.get_local_x() <= 150 and pc.get_local_y() >= 50 and pc.get_local_y() <= 100 then chat("You found the area!") pc.change_gold(1000000) pc.setqf("treasure",1) cleartimer("hidden_treasure") end end end end So if the user go to the rectangle (x: 100,150; y: 50, 100) he'll get gold only once. It uses loop_timer (3sec) but i suppose it is one time or event quest so it'll be good.

wtf enjoy with bugs guys!

Hello DEVs I understand that most people use cloudless skyboxes in these times, but there is a graphic glitch (usually when the player teleports/dragging a game window) with "jumping" clouds. [Preview with glitch - slow cloud speed] This is very annoying with fast moving clouds: [Preview with glitch - fast cloud speed] and warping: [Preview with glitch - warping] Fix: Client source: \EterLib\SkyBox.cpp void CSkyBox::RenderCloud() replace whole: DWORD dwCurTime = CTimer::Instance().GetCurrentMillisecond(); m_fCloudPositionU += m_fCloudScrollSpeedU * (float)( dwCurTime - m_dwlastTime ) * 0.001f; if (m_fCloudPositionU >= 1.0f) m_fCloudPositionU = 0.0f; m_fCloudPositionV += m_fCloudScrollSpeedV * (float)( dwCurTime - m_dwlastTime ) * 0.001f; if (m_fCloudPositionV >= 1.0f) m_fCloudPositionV = 0.0f; m_dwlastTime = dwCurTime; with: if (m_fCloudPositionU >= 1.0f) m_fCloudPositionU = 0.0f; if (m_fCloudPositionV >= 1.0f) m_fCloudPositionV = 0.0f; m_fCloudPositionU += m_fCloudScrollSpeedU * 0.030f; m_fCloudPositionV += m_fCloudScrollSpeedV * 0.030f; like that: > * 0.030f is optimal I have no idea why they decided to use ms timer for scrolling clouds in the rendering function that already has own clock and frameskip settings (now it just scales with game fps counter). With fix (when dragging client window) [Preview without glitch - slow cloud speed] [Preview without glitch - fast cloud speed] Warping: [Preview without glitch - warp] Have a nice day

Hey as requested in the discussions section im gonna make a little beginners quest tutorial. If you see something wrong just correct me by posting below. Also you can extend my tutorial. I hope at last we get a little "book" of tutorials from different users. Lets begin. Im gonna mark every user editable variable like this: <variable> The first statement that has to be in every quest is following (lua works with "end" so we have to close almost everything with "end" like below) quest <questname> begin end Now for the beginning lets add the first state. A state is something like a chapter. The first state is always the state start. Like quest end it with an "end" quest <questname> begin state start begin end end Now we can start adding events.Possible actions (+ description): kill -gets triggered everytime you kill a monster or another player. party_kill -gets triggered everytime you or a party member kills a monster or another player. enter (you can use "letter" here aswell) -at changing into the state (explanation later) leave -at changing out of the state <mobvnum>.chat."<message>" -On clicking on the npc <mobvnum> and then choosing the <message> in the appearing questwindow <mobvnum>.click -On clicking on the npc <mobvnum> unmount -on unmounting your horse info or button(should be used together) -on clicking on a quest scroll login -on logging in logout or disconnect (should be used together) -on logging out take -on pulling an item on a npc Lets do the first example with a loginmessage. The event has following syntax: quest loginquest begin state start begin when login begin chat("You logged in") end end end So in this case the "when login begin" gets triggered when the user logs in.The "chat()" is a basic quest command in will show the user a white line in the public chat at the bottom of his game like if somebody writes something to the chat. Now you know the basic quest syntax. To limit then when actions there is another helper. The "with" tag. Lets say you want to get the message only if youre above level 25 when login with pc.get_level() > 25 begin chat("You logged in with level above 25") end I just didnt write that whole "quest" and "state" stuff now i think you know how i should look like now. In this case the "with pc.get_level() > 25" checks if you login with your level over 25. The load of function like pc.get_level() and chat() that you got is just remembering and looking for them. There are some public lists of it. Most of them are self explaining by their name. pc allways (except some really special cases you shouldnt get unless you try advanced questing) means your own character Now lets say you got a boss mob at mobvnum 90001 and you want all players to be noticed that a heroic player killed this one. You know the kill trigger but you dont know how to limit it to one mob only. But you also know the "with" tag now. So lets go ahead. The command you need here is npc.get_race(). the "npc" always means the mob you killed, clicked or used an item with right now. The get_race gives you his vnum when kill with npc.get_race() == 90001 begin notice(pc.get_name().." was a heroic player and killed the boss") end I think you should all know what pc.get_name() returns right now but whats the two dots there?It does link functions with strings. So lets say you called "Quester" then the quest sees this: notice(pc.get_name().." was a heroic player and killed the boss") as this: notice("Quester was a heroic player and killed the boss") For the next im gonna show you how to make this little grey popup with text in it like the most quests have. Lets say you want to have a little smalltalk with the old woman (9006). You go to her and ask her about her real name. 9006.chat."What's your real name?" will automaticly generate the option when you click at her. when 9006.chat."What's your real name?" begin say_title("Old woman:") say("Oh hey "..pc.get_name()) say("You want to know my real name") say("Its Dave and apperently I'm an old man") say("But i have something for you") pc.give_item2(72702, 1) say_reward("You got speed shoes") end Below the last line of text there will be an automaticly generated "OK" buttonIf you want the text to be on more than one page add a "wait()" where you want to begin the next page. But then you have to make a new say_title() aswell. As you see im teaching you the basic commands while showing you the syntax. In this case its pc.give_item2(<itemvnum>, <itemcount>) (pc.give_item() is deprecated) So as last lection for this thread the if statements. Lets say you get 10 yang if youre under lvl 20 and 20 yang if youre above or equal when 9006.chat."Money?" begin if pc.get_level() >= 20 then pc.change_money(20) else pc.change_money(10) end end the if structure is pretty easy and should be understood by you. If not let me know. Ok enough for the first part. I would be happy to see other people continue with a second part Greets Inya

M2 Download Center Download Here ( Internal ) Hi everyone! So, after serveral days of searching a tool that could change the texture path of a .gr2 file, I found the tool(probably all of you know it, the texture changer by marv). After that I tried to change the texture paths of some gr2 models of a weapon, and guess what, it didn't work. I'm gonna reupload the file, because I didn't seen it on metin2dev, and I'm gonna teach you how to use it. First of all, I don't know about others, but for me it didn't work to change anything with this (I'm running windows 7 x64 bit). Some of guys told me that this "texture changer" works only on windows 7 x86 bit, so I reinstalled my windows(I really needed that tool), of course, it didn't work either way. So, go in Start and search cmd, and run it. After the cmd started you'll see a path right there C:\Users\Name (Instead of Name you'll have your username of computer administrator, or the account you're logged in), now that's the path where we can work with the tool. PAY ATTENTION!!! IF YOU START THE TOOL IN OTHER FOLDER INSTEAD OF C:\Users\Name THE TOOL WILL NOT WORK, AND YOU WILL NOT BE ABLE TO SAVE THE NEW MODEL. Exctract all the files from the archive(I'll post it below), and start Metin2TextureChanger.exe. Now click "Load" to choose a gr2 file you want to change texture path, BUT, the model name can't have spaces in name(devil sword.gr2 for example, it's wrong, the tool won't read it, and you'll not be able to save your new gr2 model), so if you want to change for example devil sword.gr2 you need to rename it into devil_sword.gr2 or devilsword.gr2 or any other name without spaces betwen. Where is "Neuer Texturpfad" we will chose the new path for texture, for example d:\ymir work\test\devil_sword_blue.dds , there you can choose any other path, but you can't modify "d:\ymir work" or you won't be able to see the weapon/armour in-game. Now we save the file wherever we want, it doesn't matter, this way must work for everybody. AGAIN, THIS TOOL WASN'T MADE BY ME. And I made this post because I've searched many days a tool that would work, but neither didn't work, and this tool didn't work for me either just when I used this method. So, this post is for guys who had the same problem like me (they had the tool, but couldn't save the new model) that's why I wanted to help them, and any other people who weren't been able to use it. And about the other tool I've found on this forum, the tool "made" by thunder-core, I didn't find that tool satisfying, it worked, but after the new model was made, I wasn't been able to import it in 3d max, or to convert the model from file format revision 7 to 6. So you were basicaly forced to upgrade your client to granny 2.9, and I found that inconvenient, because, I don't know about others, but I don't use source for binary, and because of that it's imposible to see the model in-game. And of course, the new model you've created, with the tool in attachement, is revision 7, so you need the new granny if you want to see it in-game, but you can use the converter from archive to convert from revision 7, to revision 6 (old), and you'll be able to see it in-game. If you already see it in-game, you don't need to use the converter. If you found this post helpful I'm glad I could help you.

I prepared other buttons for this system, which I think are holding a better climate. I put it here, maybe it will be useful to someone PS: I also put a project save in the package, so that you can more conveniently edit each button if necessary. Download: Mega (Metin2 Download)

M2 Download Center Download Here ( Internal ) So after 5 years I finally decided to make a map from scratch, which became the new map 1 for romanian players in WoM2: the Deunsang Citadel. I am also releasing most of the trees and shrubs I used, these are from Oblivion and I did already release them before (and many people used them in their maps) but I reworked both the lighting and the textures, especially of the trees, and fixed a couple that were not working before. [Hidden Content]

open a gr2 file in 3dsmax just read the bones, you would need a converter to add the model

"Vanilla Core 55170 Syserr Disable Diff" you serious?

Hello like in title , Im looking for someone who can unpack a client . For more details Private messange. i can pay for it ?

Hello to everyone, I have 10.000 Euro for promotion. Im searching a new developer and server files.. Please contact me if you are interesed.

M2 Download Center Download Here ( Internal ) Download Here ( GitHub ) I know this is very old idea but it's better than quest flag methods etc.

haha its obsession of turks and also idol worship lol just funny